Small Turtle Display Stand
Metal - Silver Plated Sphere and Egg Holders
Small Turtle Stand - Here is a very tiny, really cute Turtle display stand. It measures 1 1/8" x 3/4" x 3/8" and has a Silver plated finish. This little guy is so very adorable and has distinct facial accents. The sphere inner ring measures 1/2" in diameter. The stand can hold several sizes but a 18 mm to 22 mm sphere works the best.
$1.25 Each
Large Turtle Display Stand
Metal - Silver Plated Sphere and Egg Holders
Large Turtle Stand - Here is a larger, very cute Turtle display stand. It measures 2 1/2" x 2" x 5/8" and has a Silver plated finish. This bigger guy is so very adorable and has distinct facial accents. The sphere inner ring measures 1 1/4" in diameter. The stand can hold several sizes but 50 mm to 100 mm spheres works the best.
$2.50 Each
Sphere or Egg
Holder
Metal - Silver Plated Sphere and Egg Holders
SD1 This is a small Silver plated metal (not plastic) stand for holding spheres or eggs. It is 1" diameter x 1/2" in height. It will work for spheres or eggs from about 1" to 1 3/4".
$1.25 Each
Sphere or Egg
Holder
SD2 This is a medium size Silver plated metal (not plastic) stand for holding spheres or eggs. It is 1 1/4" diameter x 5/8" in height. It will work for spheres or eggs from about 1 3/4" to 2 1/2". It is shown holding a 2" sphere (not included).
Holding a 1 7/8" Sphere
$2.00 Each
Sphere or Egg
Holder
Metal - Silver Plated Sphere and Egg Holder
SD3 This is a large size Silver plated metal (not plastic) stand for holding Spheres or Eggs. It is 1 5/8" diameter x 5/8" in Height. It will work for spheres or eggs from about 2" to 3". It is shown holding a 2 5/8" sphere (not included).
Holding a 2 5/8" Sphere
$2.50 Each
Small Brass Stand
This is an attractive three legged Brass sphere stand (larger eggs, too). It measures 2 1/4" in width at the base of the legs. The circle which holds the sphere is 1" and it sets 3/4" in height.
$3.00 Each
Small Wrought Iron Stand
WR1
This is a small Wrought Iron slab/easel stand. It measures 3" x
4 1/2". A good display stand for rock slabs or smaller end cuts.
3 Stands for $6.75
Medium Wrought Iron Stand
WR2
This is a medium Wrought Iron slab/easel stand. It measures 6" x
7 1/2". A good display stand for rock slabs, end cuts or small to medium
sized fossil plaques or plates.
3 Stands for $9.00
Large Wrought Iron Stand
WR3
This is a large Wrought Iron slab/easel stand. It measures 8" x
10". A good display stand for rock slabs, end cuts, plates or larger sized
fossil plaques.
3 Stands for $12.00
Large Wrought Iron Stand
WR4
This is a Wrought Iron 3 legged stand. It measures over 2" x 1 7/8" x 2 1/2" tall. A good display stand for eggs, spheres or many other specimens from your collection.
Holding a specimen
$1.00 each
Large Wrought Iron Stand
WR5
This is a Wrought Iron 3 legged round stand. It measures nearly 2" in diameter x 1" tall. A good display stand for spheres, eggs or other specimens.
Holding a specimen
$1.10 each
Large Wrought Iron Stand
WR6
This is a larger Wrought Iron 3 legged round stand. It measures nearly 2 3/8" in diameter x 1" tall. A good display stand for spheres, eggs or other specimens.
Holding a specimen
$1.25 each
Large Wrought Iron Stand
WR7
This stand has 3 Wrought Iron legs on a Black wood base. The base has a Black foam pad on the bottom for protection from marring surfaces. It measures nearly 3 1/2" x nearly 4" x over 1 1/2" tall. The legs stick up about 3/4" above the base. A good display stand for rock slabs, end cuts, spheres, eggs or larger sized fossil plaques.
$1.70 each
Large Wrought Iron Stand
WR8
This stand has 4 Wrought Iron legs on a Black wood base. The base has a Black foam pad on the bottom for protection from marring surfaces. It measures nearly 3 1/4" x nearly 3 7/8" x over 3 3/4" tall. The two short legs stick up about 3/4" and longer ones 3" above the base. A good display stand for rock slabs, end cuts or larger sized fossil plaques.
$1.80 each