|
Introducing Rock Rascal Lapidary
Equipment
|
|
Are you interested
in learning more about how to do Lapidary Work?
Click here for informational books.
|
|
Click
on Photo for
larger Image
|
Description
|
|
Model T 6"
Combination
Lapidary Unit
$416.00
|
Model T 6"
Combination Lapidary Saw and Grinder
A portable combination unit complete with a 6" Pro-Slicer
Diamond Blade, 6" silicon carbide grinding wheel, 6" aluminum head with
sponge rubber pad, wet or dry silicon carbide sanding discs and a 6" felt
polishing pad. It is powered by a 1/4 hp motor. One side cuts and
trims, the other side grinds, sands and polishes. This is a good unit for
faceters or anyone needing a complete, compact, portable lapidary unit to
grind, cut and polish small stones.
See our shipping notes at the
bottom of the page
Please Note: This machine will be shipped direct from our suppler
to you.
|
|
Model JM
6" Trim Saw
Trim Saw
complete with motor and blade
$296.00
|
|
Model J 6"
Saw Only, No Motor, or
Blade
$126.00
|
|
Model JM
Lapidary Trim Saw 6"
This unit comes complete with Motor, Saw and Blade.
It is mounted on a laminated particle board base ready to use. Just add
coolant, plug it in and turn on the switch.
See our shipping notes at
the bottom of the page
Please Note: This machine will be shipped direct from our suppler
to you.
|
|
4" Tiny Trim Saw
$226.00
|
|
4" Tiny Trim Saw
Compact - Portable - Versatile 3000 rpm, 1/12 h.p. continuous
duty motor. This is a direct drive saw which makes for very smooth and quiet
running. The blade arbor is 1/2".
This saw would typically be used for cutting small
pre-forms for cabochons and faceted stones and comes with 4" Pro-Slicer
blade.
See our shipping notes at
the bottom of the page
Please Note: This machine
will be shipped direct from our suppler to you.
|
Model P 6" Arbor
|
Model P 6" Arbor
complete with motor
$286.00
|
|
Model P 6" Arbor
less Motor and base
board
$140.00
|
|
Model P 6" Arbor
This is a self contained arbor. The pans and splash shield
are built in. You can mount up to 6" x 1-1/2" wheels This unit is ready
for a water and drain hookup to cool the wheels that you mount for lapidary
work.
See our shipping notes at
the bottom of the page
Please Note: This machine
will be shipped direct from our suppler to you.
|
|
Rock Vice for Model
J Saw and Model T
Combination Unit
$23.00
|
Model V Rock Vise
The Model V Vise fits both the Model J Saw and
the Model T Combination Unit.
This vise will help you better control the cut on small
rocks when using the Model J or Model T Saw so that you don't have to push
the rock through the blade by hand.
Please Note: This item
will be shipped direct from our suppler to you.
|
|
Model D Dop Pot
$54.00
|
Rock Rascal
Model D Dop Pot
This is an Electric Dop Pot with a removable copper pan.
It has a 50 watt ceramic heater which heats and maintains the proper dop
wax temperature. It can also be used for a small pickling pot.
See Also the Dop Wax below.
Click here to learn How to use a Dop
Pot and Wax
|
|
Micro Deluxe
Carving Machine
$195.00
|
Lasco
Micro Deluxe Carving Machine
The Lasco Micro Deluxe machine is light weight, easy
to use, and extremely portable. The unit comes complete with a variable
speed 110 volt AC table top power controller/converter, a 12 volt DC micro
motor hand piece, a shaft restraining pin, and a chuck wrench.
Use the table top dial control box to quickly adjust
the hand piece to any desired speed up to a maximum 25,000. The off/on
switch is located in the hand piece for quick and easy access. The
machine comes equipped with a standard 3/32 collet and a Jacob's chuck.
Also available in 220 volt.
Are you interested
in learning more about how to carve stone?
Click here for informational books on carving.
See our Shipping Notes at
the Bottom of the Page
|
|
Starter Kit for Carvers
12 pieces - 150 grit
|
Lasco Starter Kit for Carvers
This is a basic starter set for carving and includes
12 pieces of various shaped diamond grinding bits in 150 grit diamond and
1 cut off saw.
Are you interested
in learning more about how to carve stone?
Click here for informational books on carving.
$75.00
|
|
5 Wire Drills and Burr Set
|
5 Diamond Wire Drills and Bur Set
This is 5 - 1 1/2 mm diamond wire drills for drilling
holes in stones. Use these to drill a hole for a bell cap, or to glue
a finding in to hold a pendant or to run a cord through.
Click here to learn the basics of how these could be
used:
How to use Diamond Wire Drills
$14.00
|
| Dop Wax, Templates
for Stone Cutting |
|
Dop Wax
|
Regular green colored dop wax has been an industry
standard for years, very tacky grab and strong bond, softens at 150F,
1 lb. box of 4 sticks |
$10.50
|
|
|
Dop Wax
|
High-Temp - Black - has a higher shellac content
and gives good heat resistance. Good bond, softens at 175F, 1
lb. box of 4 sticks |
$10.75
|
|
|
Dop Pot
Copper Insert
|
Extra Copper Pot for the Rock Rascal Model D Dop
Pot |
$12.00
|
 |
|
Aluminum Scribe
|
Aluminum Scribe for use with templates
(price per each) |
$1.25
|
|
|
Wood Dopsticks
|
Package of 24 Wooden Dopsticks 1/4" x 3 1/2" |
$7.50
|
|
|
Set of 5 Colored Templates
|
Set of 5 templates 4 x 5" - ovals, circles,
squares, rectangles. Aluminum offers rigidity and durability.
|
$8.00
|
|
|
T-Set-M
|
Metal - Set of 3 with Scribe. Aluminum offers rigidity
and durability. The shapes are similar to the plastic set below. |
$17.75
|
|
|
Set of 3 Plastic Templates
|
Plastic - Set of 3 with Scribe. The plastic
templates are a low cost alternative to metal and allows the user to
see the positioning on the slab. |
$12.75
|
|
|
