Go Back To Rock Tumbler
Page
Click Here For Crushed Rock
for Tumblers
See Also our Bulk Rock
| Go to Page: [ 1 ] [ 2 ] | ||||||
Silicon Carbide Grit, Polish and Accessories |
||||||
|
Ceramic Pellets Large Cylinders |
This is a non-abrasive Ceramic media.
These can be used when tumbling rock to act as a grit carrier and filler to
aid in grinding and polishing of the stones in the tumbler. They are angle
cut cylinders measuring 3/8" x 5/8" and can be used in all steps from start
to finish.
They are reusable and will last for a long time. Click Here to See some rock we polished using this media as a filler in a UV10. |
|
||||
Ceramic Pellets Small Cylinders |
This is a non-abrasive Ceramic media.
These can be used when tumbling rock to act as a grit carrier and filler to
aid in grinding and polishing of the stones in the tumbler. They are angle
cut cylinders measuring 5/32" x 5/16"and can be used in all steps from start
to finish.
They are reusable and can also be used as a Burnishing Media for jewelry items. They require about a 24 hour break in period before using them for burnishing metals. |
|
||||
Ceramic Pellets |
This is a non-abrasive Ceramic media.
These can be used when tumbling rock to act as a grit carrier and filler to
aid in grinding and polishing of the stones in the tumbler. They are 4
mm spheres in shape and can be used in all steps from start to finish. They are reusable and can also be used as a Burnishing Media for jewelry items. They require about a 24 hour break in period before using them for burnishing metals. 3 pounds would be required for our 4 pound Lot O Tumbler. |
|
||||
![]()
Stainless Steel Jewelry Media |
Stainless Steel Jewelry Media - This is used for polishing Gold or Silver jewelry but not recommended for jewelry with stone settings. This mixture consists of balls, ball cones, pins and angle cut cylinders. It is the perfect shape and size for jewelry work. They are used wet with burnishing soap. One or two pounds is the average load for a three pound barrel. The major advantage is that this steel shot will not rust. | 1 Lb. $19.75
|
||||
![]()
Burnishing Compound |
Burnishing Compound - Works on both silver and gold. Also works in cutting cycles. One compound for all your needs. High quality burnishing and lubricating for bright finishes. A little goes a long way. Starting ratio is a heaping tablespoon to a gallon of water. Adjust if necessary. | 1 Lb. $7.00 | ||||
|
Ground Walnut |
This is ground Walnut Shell, a soft grit abrasive with no
polish added. This is a coarse size - 8/12 grit and will work in
both vibrating and rotary tumblers. This will work great to remove tarnish
from jewelry and other metal items. For more of a polish on jewelry, brass,
coins and other items add red rouge.
Walnut shell will work in both vibrating and rotary tumblers. Estimated amounts needed for the various tumblers below: 2 lbs - lot O Tumbler |
|
||||
![]()
Red Rouge |
Red Rouge - Use with walnut shell to polish jewelry and brass shell cartridges. Inexpensive tumbler polish. A little Red Rouge goes a long way, you won't need very much. It will leave a residue on polished items which will need to be washed off. | 1/2 Lb. $4.50
|
||||
|
Ground Walnut |
This is ground Walnut Shell, a soft grit abrasive with no polish added. This is a medium size - 12/20 grit, and will work in both vibrating and rotary tumblers. Slightly finer than It can be used as is to remove tarnish from jewelry and other metal items or add red rouge for more of a polish on jewelry and other items. |
|
||||
|
Ground Corn Cob |
Corn Cob 10/14 Grit This is ground Corn Cob, a soft grit abrasive with no polish added. This is a coarse size - 10/14 grit and will work in both vibrating and rotary tumblers. It can be used as is to remove tarnish from jewelry and other metal items or add red rouge for more of a polish on jewelry and other items.
|
|
||||
|
Ground Corn Cob |
Corn Cob 14/20 Grit This is ground Corn Cob, a soft grit abrasive with no polish added. This is a medium size - 14/20 grit and will work in both vibrating and rotary tumblers. It can be used as is to remove tarnish from jewelry and other metal items or add red rouge for more of a polish on jewelry and other items.
|
|
||||
|
Ground Corn Cob |
Corn Cob with Polish Added This is ground Corn Cob with the polish added. It works great for polishing jewelry, coins, rifle casings, brass, copper and other items. Carnauba wax and Aluminum Oxide it will produce an excellent shine in 2+ hours on most items with a vibrating tumbler.
|
|
||||
|
Green Plastic |
This is 1/4 " pyramid shape Green
plastic media.
This media will produce a very
smooth finish ready to polish with the walnut shell or corn cob above.
|
|
||||
|
Dark Green |
This is 1/4 " pyramid shaped Dark Green plastic media.
This media is used
in most standard applications for light metal removal
with minimal metal loss. More cut than the light green above. Check
parts frequently.
|
|
||||
Im on Page 3
Go to Page:
[ 1 ] [
2 ]
Go Back To Rock Tumbler
Page
Click Here For Crushed Rock
for Tumblers
Ordering information and instructions
| The Rock Shed 515 1st Street Keystone, SD 57751 |
Hours: Monday - Saturday 9:00 AM to 6:00 PM |
Home
Long
Gemstone Beads I
Short Beads I
Amber Beads I
Bracelets I
Earrings I
Sterling Pendants
Rosaries I Fossils
I Copal
I Polished Rock
I Educational Kits
I Bookends
I Gold Specimens
Hearts I Septarians
I Spheres I
Eggs I Minerals
I Gemstone lights
I Books I
Plastic Stands I
Brass Stands
Rock Tumbler Page I
Grit and Accessories I
Tumbling Rock I
Rough Rock I
Landscape Rock
Lapidary Grinders I
Lapidary Saws I
Diamond Blades I
Shipping Information I
History I
Auctions I
Pictures I
Links